0 out of 5 stars from 0 reviews.
There are currently 0 reviews for Pixel Timer Remote Control Wireless TW-282/DC0 for Nikon. Use the tabs below to read reviews, ask a question, add your own review, see delivery information or check our Maintenance tips.
Love it, Like it, Tweet it, Pin it, Share it....
The Pixel TW-282/DC0 Wireless Timer Remote Control can be used to wirelessly trigger your Nikon camera from up to 100 meters away. The TW-282 allows you to take singular photos, multiple photos and photos with a customized shutter speed. If you are able to adjust the exposure time on your camera, the TW-282 allows you to manually set the exposure time up to 99 hours, 59 minutes and 59 seconds. Delay shooting is also possible with the TW-282. In the delay-shooting mode, you are able to select the number of photos you wish to take (1-99) after setting a delay of up to 59 seconds. Once the timer has counted down, the camera will begin taking the selected number of photos with an interval of 1 second. Further, it is possible to set up a timing plan whereby a delay, exposure time and the interval between photos, all of up to 99 hours, 59 minutes and 59 seconds, can be set. Within this time plan, the number of photos you wish to take can be set from either 1-99 photos or an unlimited amount which, triggers the camera to continuously take photos until you press stop. The transmitter sends a signal of 2.4GHz to 100 meters away, at up to 99 different channels. The 2 AAA batteries located within the remote, have a standby time of up to 3 years.
The receiver is equipped with a standard ¼” female thread on the bottom, which allows you to place it on top of a light stand next to your camera. Alternatively, the universal hotshoe connection allows you to place the receiver on top of your camera. The 3V lithium battery provides up to 400 hours standby time.
The TW-282/DC0 Wireless Timer Remote Control is suitable for the following cameras:
D1, D100(WITH MB-D100), D1H, D1X, D2, D200, D2H, D2HS, D2X, D2XS, D3, D300, D300S, D3S, D3X, D4, D4S, D5, D500, D700, D800, D800 E, D810, D810 A, D810 E, D850, F100, F5, F6, F90
The TW-282/DC0 can be used with various other cameras through the use of a connection cable. Such connection cables can be found in the optional accessories tab below or alternatively, you can find the cable suitable for your camera here: Connection Plugs
TW-282 transmitter; receiver TW-282; CR-2 lithium battery; 2 x AAA batteries; connection cable Shutter; Manual
Camera House Price: £49.99
The Pixel Timer Remote Control Wireless TW-282/DC0 for Nikon is shown in Accessories.
Fast Delivery to Mainland UK
There are currently no reviews for this product. Be the first one to review Pixel Timer Remote Control Wireless TW-282/DC0 for Nikon
Add Your Review
Ask a Question
Delivery will be made by Royal Mail, you will be able to track your order online to find your scheduled delivery date. Any deliveries scheduled to arrive on the Saturday or Bank Holiday will be delivered the following working day. We aim to dispatch your order within 24 hours of the time the order has been placed.
Looking after your camera
Use a Camera Bag
A camera bag does more than just protect the camera against scratches and dust: It keeps it safe from rain because many are waterproof on the outside.
Be Very Careful Around the LCD Screen and Camera Lens
Use only special equipment to clean your camera’s LCD screen and camera lens. Buy a special cleaning kit that includes liquid solutions, microfiber cloths and brushes that have been specially designed to clean your camera lens.
Never Leave Your Batteries in Your Camera for Too Long
Many camera batteries are now alkaline or lithium formats. If you keep your camera with the batteries inside of it in a moist area, then the batteries can get corrosive. So if you’re thinking about just putting your camera on the shelf for several months, do yourself a favor and remove them.
Turn Your Camera Off Prior to Doing Anything
Before you do anything to your camera, always keep in mind that it should be turned off first. No matter what it is—swapping lenses, changing memory cards or disconnecting or attaching cables—your camera should be turned off.
Cold and Wet Weather Can Wreak Havoc on Your Camera Body
Take your camera out only in a waterproof bag. If the weather’s unusually cold, just wrap your camera in a plastic bag that has silica desiccant packets for the reduction of moisture. It’s also a smart idea to have a soft towel with you to wipe off any moisture, just in case it should get on your camera.
Good Memory Card Care Is Good Camera Care
Only transport your memory cards inside of a protective caseMake sure the memory cards stay dust-free at all times. When removing memory cards, make sure you do so indoors or in non-dusty situations.
Make sure that you keep memory cards only in cool places. Never keep them in places where they may heat up, like dashboards or glove compartments.
Never place your memory cards close to magnetic sources. Examples of magnetic sources are things such as audio speakers, TV monitors and actual magnets.
Use a Filter to Protect Your Camera Lens
The lens of your camera is naturally fragile. As such, it’s susceptible to scratches, cracks, dents…you name it. A UV filter will not only will you give your lens a fighting chance, but you’ll also enhance the quality of your pictures.
Condensation Can Be Controlled
Condensation normally happens when you move your camera between different temperatures.
Allow your camera a chance to naturally get used to the hotter environment. Don’t place it inside a closed plastic bag when transporting it between different temperatures! Just let the camera sit in the humid temperature for a while, until condensation disappears.
If this still doesn’t get rid of all of it, you can utilize a soft cloth to wipe away any remaining moisture and marks left behind from the condensation.